| Safety Rules |
|
|
|
|
SECTION 2 SAFETY RULES 1. All cars in all divisions must pass safety inspection to race! 2. All drivers must wear an approved helmet. It is recommended that helmet meet the specifications set forth in Federal Motor Vehicle Safety Standard Regulations or American National Standards Institute, Inc. Full face type helmet is recommended. 3. It is mandatory that drivers in all divisions wear a fire resistant driving suit. THIS SUIT MUST BE WORN AT ALL PRACTICE SESSIONS (pre-race or weekly) AND AT ALL RACE EVENTS. Fire resistant gloves are also recommended. 4. No passengers are allowed in a race car when the car is on the track. 5. Race cars must enter the racing surface from the pit road/pit exit inside Turn Two. Race cars must exit the racing surface using the pit entrance in Turns Three (3) and Four (4). Pit entrance/exit on the back stretch is for emergency use only. Using the pit entrance/exit on the backstretch during races will result in a 1 lap penalty unless directed to do so by a track official. When pitting during practice and races, pit behind the white line, leaving pit road clear. Maximum pit road speed is 20 mph and will be enforced during practice and race. 6. Medical Release: Any driver who has been injured, hospitalized for treatment, undergone surgery, or has been fitted by a physician with a cast, brace or prosthesis, or who suffers from a chronic or progressive debilitating illness, may be required to present certification from the treating physician, stating that participation as a driver will not exacerbate any medical condition or complicate the process of normal healing. Ace Speedway further reserves the right to require such certification in case of pregnant women wishing to participate in racing activities. In any such case, Ace Speedway reserves the right to decline the entry of any individual whose participation as a driver might endanger their own health or safety, or the health or safety of the other drivers, participants or spectators. 7. Loading Cars: Load cars after all races are completed. Pit road must be kept clear during practice and races. 8. It is recommended that the area that extends from the top of the frame to the top door bar between the main roll bar and the front roll bar leg on the drivers side be covered with a 1/8” magnetic steel plate. The plate if used must be welded to the top door bar and the top of the frame rail. 9. Head and neck restraint systems are HIGHLY recommended. |